Threaded inserts made from high quality CZ121/CW614N brass to give high tensile strength, excellent resistance to corrosion and good electrical conductivity.
Suitable for ultrasonic, heated or cold press-in installation into most grades of plastic and for light loading applications in wood and composites.
Unique knurl and groove design gives excellent resistence to torsion and pull-out.
The head can be used to make an electrical contact, retain a component or to increase torque resistance.
Available in regular and short versions with reduced head diameter and double head height sizes.
Please contact us for prices and stock information.
|M2||2.0 / 4.2||4.8||0.50||3.0-3.3|
|M2.5||4.1 / 5.2||5.5 / 7.1||0.75||3.7-4.0|
|M3||4.1 / 5.2||5.5 / 7.1||0.75 / 1.50||3.7-4.0|
|M3.5||4.1 / 7.1||6.4 / 7.9||0.75 / 1.50||4.6-5.0|
|M4||5.6 / 8.5||7.1 / 8.7||0.75 / 1.50||5.4-5.9|
|M5||6.6 / 10.1||7.9 / 11.1||0.90 / 1.75||6.0-6.5|
|M6||7.7 / 12.3||9.5 / 12.7||1.00 / 2.00||7.7-8.2|
|M8||10.1 / 13.8||12.7 / 14.3||1.25 / 2.50||10.2-10.6|
|M10||13.8||14.3||2.50||12.5 - 13.0|